If the UIO scripts (Sect. 4.6) are properly installed,
you can view the contents (more precisely the headers of the data entries) of an UIO file
with uiolook filename, e.g.
uiolook st35gm04n05_03.endgives the output (slightly edited)
----------------------------------------------------------------------------------
fileform uio form=unformatted convert=ieee_4 version=0.1.2000.11.26 &
date='02.01.2002 16:17:26.036' system=craSHi machine=craSHi osrelease=10.0.0.6 &
osversion=UoK.4 hardware='CRAY SV1' language=Fortran90 program=RHD
character file_id f=A8 b=8 n='File identification'
character description d=(1:1) f=A24 p=1 b=24 n='File description'
character history d=(1:20) f=A80 p=1 b=80 n='File history'
character version f=A80 b=80 n='Program version'
label dataset n='RHD model' date='02.01.2002 16:17:26.043'
character dataset_id f=A10 b=10 n='Type of box hierarchy'
real modeltime f=E13.6 b=4 n=time u=s
integer modelitime f=I11 b=4 n='time step number' u=1
real dtime f=E13.6 b=4 n='time step' u=s
real time_out_full_last f=E13.6 b=4 n='Time of last output of full model' u=s
real time_out_mean_last f=E13.6 b=4 n='Time of last output of averaged data' &
u=s
label box date='02.01.2002 16:17:26.049'
character box_id f=A80 b=80 n='Block identification'
integer dimension d=(1:2,1:3) f=I7 p=6 b=4
real time f=E13.6 b=4 n=time u=s
integer itime f=I11 b=4 n='time step number' u=1
real xc1 d=(-63:63,-63:-63,-63:-63) f=E13.6 p=4 b=4 &
n='x1 coordinates of cell centers' u=cm ds=(0:0,0:1,0:1)
real xc2 d=(-63:-63,-63:63,-63:-63) f=E13.6 p=4 b=4 &
n='x2 coordinates of cell centers' u=cm ds=(0:1,0:0,0:1)
real xc3 d=(-63:-63,-63:-63,-63:63) f=E13.6 p=4 b=4 &
n='x3 coordinates of cell centers' u=cm ds=(0:1,0:1,0:0)
real xb1 d=(-63:64,-63:-63,-63:-63) f=E13.6 p=4 b=4 &
n='x1 coordinates of cell boundaries' u=cm ds=(0:1,0:1,0:1)
real xb2 d=(-63:-63,-63:64,-63:-63) f=E13.6 p=4 b=4 &
n='x2 coordinates of cell boundaries' u=cm ds=(0:1,0:1,0:1)
real xb3 d=(-63:-63,-63:-63,-63:64) f=E13.6 p=4 b=4 &
n='x3 coordinates of cell boundaries' u=cm ds=(0:1,0:1,0:1)
real rho d=(-63:63,-63:63,-63:63) f=E13.6 p=4 b=4 n=Density u=g/cm^3
real ei d=(-63:63,-63:63,-63:63) f=E13.6 p=4 b=4 n='Internal energy' u=erg/g
real v1 d=(-63:63,-63:63,-63:63) f=E13.6 p=4 b=4 n='Velocity 1' u=cm/s
real v2 d=(-63:63,-63:63,-63:63) f=E13.6 p=4 b=4 n='Velocity 2' u=cm/s
real v3 d=(-63:63,-63:63,-63:63) f=E13.6 p=4 b=4 n='Velocity 3' u=cm/s
label endbox
label enddataset date='02.01.2002 16:17:43.322'
----------------------------------------------------------------------------------
The UIO format is described in some detail in Sect 4.
Each entry has a type (e.g. ``label'', ``real'', ``character''),
an identifier (e.g. ``box'', ``time'', ``description''),
and additional information about array size (e.g. ``d=(-63:63,-63:63,-63:63)''),
data format (e.g. ``f=E13.6 p=4 b=4''),
and properties of the quantity (e.g. ``n=Density u=g/cm^3'').
Each start (``rhd.sta'') or final (``rhd.end'') model file has a structure
as shown above. The (``rhd.full'') file usually contains a sequence of these
data sets, which of course can also be used as start model of a simulation.